Essential Tips for Installing and Maintaining a Logo Lightbox Sign
Introduction
A logo lightbox sign can make your storefront look professional and attract customers’ attention. But installing and maintaining one can be daunting if you’re not familiar with the process. Here we’ll provide you with a step-by-step guide to installing and maintaining your own logo lightbox sign so that you can keep your brand shining bright for years to come.
PRE-INSTALLATION PREPARATION
A. Choosing the Right Location
A logo lightbox sign’s placement is essential to its success. The sign must be visible to those who will see it, but not so obvious that it overshadows other neighboring signage. The best position is on a structure that is often used by humans or vehicles.
B. Measuring the Available Space
To install the logo lightbox sign, you must first measure the area where you wish to place it. Measure the length, breadth, and height of this area and use those measurements to determine what size sign you need. Make sure there is enough space to accommodate a lightbox sign with your brand on it.
C. Determining Power Supply Requirements
You should think about how much light your logo lightbox sign needs when figuring out your power supply needs. Warm white and cold white are the two primary color temperatures for LED lights. While cool white lights tend to be more blue and provide a cooler light, warm white lights tend to be more yellow. The wattage of the bulb determines how brilliant the light is.
D. Obtaining Necessary Permits (if applicable)
You could require a permit from your neighborhood city or county if you plan to place a logo lightbox sign on your property. We advise phoning the city or county officials in your area and directly inquiring if a permit is required. They can provide you with further information about your particular circumstance.
INSTALLATION PROCESS
A. Gathering Necessary Tools and Equipment
If you want to install your logo lightbox sign, you will need to gather the necessary tools and equipment. You will need:
- Logo lightbox
- Measuring tape
- Level
- Power drill
- Drill bits
- Screws
- Wall anchors
- Screwdriver
- Pencil
- Electrical wiring
- Wire strippers
- Electrical tape
B. Mounting the Logo Lightbox on the Wall or Facade
Step 1: Find a location for the sign. Make sure there is a power outlet nearby and that the location will be visible from the street.
Step 2: Use a stud finder to locate studs behind walls. Drill holes through the wall where you have identified studs and into the studs themselves. This will allow you to mount your sign with screws.
Step 3: Place your lightbox sign into position, making sure it is level and secure. If necessary, use a level to ensure that your sign is not crooked or tilted.
Step 4: Attach mounting brackets to the back of your lightbox sign using screws. The mounting brackets should be placed near each corner of the sign so that it can be secured tightly against the wall or facade.
C. Connecting the Power Source
Connecting the power source is a very easy process. It only involves connecting the power connector to your power source and then connecting the other end of the cable to your logo lightbox. This can be done by simply following the instructions on your power supply box.
MAINTENANCE & CARE
A. Regular Cleaning and Dusting
Regularly washing your Logo Lightbox Sign with a moderate detergent and water solution will keep it looking new. To clean the sign, you can alternatively use a soft cloth or a microfiber cloth.
Avoid using paper towels or abrasive cleaners since they could scratch or harm the sign’s surface.
B. Inspecting and Replacing Bulbs or LED Modules
You might need to get your logo lightbox sign’s LED modules or bulbs checked out or replaced. A knowledgeable technician can complete this straightforward task in less than an hour. You should check your logo lightbox sign at least once a year to make sure it’s in good shape.
When you notice the lights on your logo lightbox sign dimming or flickering, it could be time for a bulb replacement. If you notice any flickering with red lights, this could mean that the power source has failed or that the LED module needs to be replaced.
C. Checking Electrical Connections Periodically
It is important to check the electrical connections on your lightbox sign periodically to ensure that they are in good working order and that no corrosion or other damage has occurred.
Design Your Own
Don't miss these stories
The Psychology of Logo Lightboxes: How Colors and Shapes Affect Customer Perception
How Logo Lightboxes
The Science of Light: Understanding The Technology Behind Logo Lightboxes
The Science of